Year "2006". Access to microwave termite treatment equipment for personal use, now made available to the public after 12 years of industrial field usage by pest control industry professionals. Please read the following for details and kit cost.

The use of microwaves as an alternative non-chemical treatment for control of wood destroying pests works highly effectively, in fact maybe too effectively. Introduction of this non-chemical alternative has created uproar within the chemical manufacturing and usage industry. So much that legislative bodies throughout the U.S. have been lobbied by chemical manufacturers and users special interest groups, which plead for government controls and restrictions on all non-chemical wood destroying pest devices. Many legislative bills have been passed on their behalf, most totally outlawing the complete use of a non-chemical device for the control of Wood destroying pests, i.e. Termites & Wood beetles, by professional industry and private citizen use. The Department of pesticide regulation governing their region outlaws them for use unless reviewed, accepted and then registered for use. This is like putting the Fox in charge of the hen house. These agencies regulate chemicals and chemical usage and they have no means or ways to determine the safety and/or effectiveness of non-chemical devices, therefore no devices submitted for review ever receive registration. This is how non chemical usage and it's technological advances is stopped for the protection of the chemical manufactures and industrial users continued profiteering without due respect or concern for future public safety and the environment. Although the device is registered with the EPA and complies with UL and OSHA requirements, its use becomes void. There are no non-chemical usage advocate groups to represent the public in support of non-chemical usage alternatives when legislation is lobbied, drawn up and passed in support of the Chemical Industry. This can be compared to the use of alternative non-fossil fuel sources of which for decades has been denied future advancement due to the special interests of the oil industry. It has not been until recently that federal intervention requiring mandated alternatives be introduced to the auto industry on behalf of the public and that took an act of congress.
Would it be so terrible if the Dow Jones Industrials fell 50 points due to poor chemical sales and the poison gas, "sulfural floride", used to tent houses for termites, suddenly quit being released into or atmosphere by 50% and the billions of dollars saved yearly by homeowners having a less costly non-chemical alternative were spent instead on other necessities of life?
Now that you know the truth about non-chemical alternative wood destroying pest devices and the ramifications of their use politically as to why your local termite control company does not offer the technology in lieu of tent fumigation or chemical application and the fact that it may be decades before an act of congress is passed allowing U.S. Citizens to exercise their rights to use such alternatives, we proudly offer a consumer do it your self Microwave Treatment Device Kit. Complete kit is based on original Wavelength Proto2 System with original parts and equipment as tried, tested and used commercially since 1994. Wavelength Currently has two systems, the Proto2 and the Proto3 of which are permissible for use in California by the state Department of Pesticide regulation only because their use was grand fathered in as permissible but not registered. These systems have been used successfully by the commercial industry for years, however because of new state legislative laws restricting the use of new systems not yet registered, Introduction of newer models are not permissible for use unless Reviewed and registered by the state Department of Pesticide Regulation first, of which the registering agency has no protocol to perform, so the commercial industry in California is limited to using older systems and can not purchase an updated model.
Our goal at Extermiwave is to provide an affordable, effective & safe do it your self system kit for the property owner who prefers to treat their property with a non-chemical alternative microwave treatment procedure. The system must be partially assembled by the purchaser to avoid legal ramifications. The systems complete use and liability is that of the purchaser. The cost of the kit, in most cases is less than the cost of whole structure tent fumigation. Once systems are built they will last for years of use over and over. Most homeowners are confused about whole structure fumigation. They are mislead to believe that a tent only needs to be done once and all is well. The fact is that once a home is infested and even if tented, the odds are that it will again be re-infested. The facts are that once a home is tented, it will need to be re-tented every 5 to 10 years. In areas like Hawaii, Homes need re-tenting every 5 years. This is very frustrating to Hawaiian Island residence because it takes about five years after a tenting for the beautiful vegetation to grow back, just in time to be killed again by poison gas.
Extermiwave in conjunction with Wavelength Entomologic Microwave Treatment Systems, the original inventors & manufactures of this million dollar technology, has agreed to supply kit materials for building do it yourself construction and usage by the common person, so those interested can help in benefiting, self health, Mother Earth and their own pocket books.
Extermiwave realizes that not everyone is Earth conscious or a Do it your self-person. The following is just some of the users that will benefit from the systems use. Owners of agricultural buildings such as barns & corrals. Owners of multiple unit residences such as apartments, motels & Townhouses. Owners of commercial & industrial buildings such as business outlets, commercial malls & supermarkets. Owners of a Condo attached to others in a complex. Even owners of single family homes or rentals located in coastal regions or areas of widespread re-occurring termite infestations.
The system kit can be offered at 1/10 the finished product purchase price because no liability exists to seller. Kits are produced in the U.S.A. Some electrical components are imported. Just like a power tool, system should always be keep out of the reach of children or/persons that are unfamiliar with it's operation. All systems are equipped with a security key for operation of which should always be removed and stored in a safe place during system non-use or storage. System kit comes with the original commercial Proto2 System operating manual and label for user professional operation. There are slight changes from original Proto2 Digital Timer, for the kit affordability, Timer is manual & cables are hardwired instead of removable. Electronic Monitoring Equipment is professional, same like & kind to original Proto2 and safety shielding is 3'X 3' instead of 6'X 6' as with commercial unit. No plastic generator face or commercial lift is provided with kit, user is to use their ingenuity as to unit movement, such as stacking on secured boxes, milk crates or a scaffold.

Kit contents:

Generator & Case (felted wood case with pre cut vents & 600 or 700 watt Generator)
Line cord & Timer (40' 15amp cord to timer box & 6' line cord to power)
2 safety shields (each 3'x 3' Alumiflex shielding material)
1 Microwave detector (Hand held electronic) 9-volt battery operated.
1 temperature probe (mechanical)
1 Operators Manual (Original Proto2 GE575 Pest Device treatment & operations)

Kit Assembly:
You will be required to attach the line cord to timer and generator via pre-wired slide on electrical connectors, no soldering required, insert generator within case and tighten cord retainer nut and close case face, screw on corner legs and install vents with screws and beauty washers. All parts and materials for construction provided. Estimated assembly time is 2 hours or less.

Tools required for assembly: Phillips screwdriver and pliers.

The system is not labeled with a manufacturers name or any warning labels. Purchaser should label it with their name and provide recommended warning labels as shown in operators' manual.

Extermiwave Nor WavelengthEMTS assumes any liability whatsoever for the finished products use, misuse, intended use or it's existence. Strict liability for the finished product rests solely on the assembler who is final product manufacturer.

All kit parts and materials are warranted for a period of 12 months of purchase date.

All kits are 120 volt AC Voltage only. European kits are custom order.

Cost per kit is $955.00 U.S. Dollars. Plus shipping, handling & applicable tariff fees.

Final product is a $10,000.00 system composed of one million dollars worth of technology research ready to work for you, all for under $1000.00. Unfortunately you can only use this system for your personal use and on your own personal property or you may have it confiscated and be subject to fines depending on your local governing codes.
Remember, the government does not want you taking profits away from chemical manufactures because your money and environment belongs to them.

To purchase: E-mail your request to info@extermiwave.com